Blacknose 30W A3 Laser Cutter

£2,400 £2,000 ex. vat

The Blacknose 30W A3 Laser Cutter is our smallest Laser Cutter, it is ideal for model makers, hobbyists and hackers and will be perfect in the home, workshop, studio or small business. Our ready-to-run package includes water tank, air assist and extraction fan so you can be up-and-cutting quickly. The 30W Blacknose is good value for beginners and small enough for any workshop or office.

Please note the workstand is not included in this package, it is an optional upgrade for £150

This machine uses a 30W laser tube, replacements are available for £200

This product comes with a tub and pump sufficient for 3 hours of cooling but we recommend this product be purchased with a CW3000 chiller.

This machine comes with an extractor fan for venting externally, we are also able to supply BOFA filtration unit at cost, should they be required. BOFA recommends the AD Oracle IQ for use with this laser cutter.

Purchase Enquiry

Key Features

300mm x 400mm cutting area
The cutting area holds a sheet of A3 card, but there is an additional 100mm on each side of the Laser cutting area for oversized objects
1,100mm x 660mm x 450mm machine size
The laser cutter has a compact size that would easily fit on a bench in a shed or garage, all of the external connections are on the sides of the machine so it can be pushed against a wall.
30w laser tube
The 700mm long laser tube produces a peak output of 40W and 30W of continuous cutting. It will typically cut through 3mm birch laser ply at 12mm/s. The tube should last for around 1200 hours and comes with a 3 month warranty.
Lasercut 5.3 Controller
The laser uses the Lasercut software package from Leetro automation. It is capable of importing dxf files such as those created by 2D design and Adobe Illustrator.
100mW Red dot alignment
The laser aiming dot is particularly helpful to optimise your material usages and for realign work after removing it from the laser cutter.
Powerful extraction
Vaporised material can leave significant staining on the work piece, the extractor fan draws the smoke out of the machine and away from the work in progress.
Air assisted cutting
A 120 L/Min compressor pumps air through a pipe right up to the cutting head. Air assist improves the cutting effectiveness and protects the optics from smoke damage.
Honeycomb bed
A closely packed framework of end on metal sheets. The dense arrangements supports all the work while cutting small items, the end on style reduces the number of laser reflections that burn the underside of the work.
Knife bed
A dozen vertical slats support large pieces of work during cutting, the vertical arrangement limits the number of laser reflections that burn the underside of the work.
LED illumination
A row of LED lights under the X-axis provides even illumination of the work piece during cutting.

Technical Specification

Laser power: 30W
Maximum cutting area: 400 x 300mm
Body dimensions: 1,100 x 660 x 450mm
Repeatability: ± 0.05mm
Power source: AC 110 – 220V ± 10%, 50 – 60Hz
Total power: <1,000 W
Operating temperature: 0 – 45 °C
Humidity: 5 – 95%
Weight: 90kg

Postal Address

Unit 10, The Wholesale District
Clarke Road
United Kingdom

0115 871 2088

Company Reg: 08830095
VAT Number: 199319457