Regretfully Just Add Sharks Ltd has closed at the end of September 2017. Over the last year Just Add Sharks Ltd has faced challenges with the vanillabox crowdfunded Open Source laser cutter project and with leads times from their suppliers. Demand for low cost laser cutters has outstriped the supply. Lack of timely supply causes delays and disappointments to customers. This is further exasperated by the drop and fluctuating value of pounds sterling. Just Add Sharks Ltd will honour all customers manufacturers warranties.

Customers should continue to email their requests for technical support, software support, spare parts and warranty enquiries to info@justaddsharks.co.uk or using the contact form below.

Check your model of Laser Cutter in Lasercut 5.3

Lasercut5.3 is used on all our laser cutter models. You will need to ensure you have the correct model selected. To do this open Lasercut5.3.

Find the model identifier at the top of the opened program window. The above example shows the software for the BLACKNOSE A3 laser cutter. If your model is not a BLACKNOSE A3 you will need to run the appropriate BATCH FILE from the LASERCUT53 folder on the route of OS (C). Close Lasercut 5.3 program and located the LASERCUT53 folder.

The BATCHFILES are in alphabetical (not laser cutter size) order called:

  • Lasercut 5.3 – Blacknose
  • Lasercut 5.3 – Greyfin
  • Lasercut 5.3 – Silvertail
  • Lasercut 5.3 – Whitetooth

Double click on the appropriate batch file for your machine. You will see the following WARNING appear.

Click where is says “MORE INFO” clicking OK will NOT run the file. Once you have clicked MORE INFO next click RUN ANYWAY. This warning appears as a safeguard. Batch files are used to alter programs.

Open Lasercut 5.3 program.

You should now have the correct model shown at the top of the programme window. In this case the Greyfin A2.

Postal Address

Company Reg: 08830095
VAT Number: 199319457